Skip to content

Scale 1:25 calculator

At 1:25, one inch on the model stands for 25 inches (2 ft 1 in) on the real thing. Enter a length in the calculator and the other value appears as you type.

Scale Ratio

1:25

Scale Factor

0.04

Result

Real Length 10 ft
Map Length 4.8 in
  • 1 inch on the model = 25 inches (2 ft 1 in) in reality
  • Scale factor: 0.04, so the model is 4% of the real size
  • The usual scale for American car and truck kits, and a common one for metric room and detail drawings
advertisement

Scale 1:25 ruler

The top strip (dark blue) is the length on the model, the bottom strip (light blue) is the real length. It follows the numbers you enter in the calculator.

Approximate size. Calibrate with a card for exact measurements.

Map / Model Reality

Scale 1:25 conversion table

The left column is the real length and the right column is the same length at 1:25. Inch values are exact, not rounded.

Real length Length at 1:25
1 ft (12 in) 0.48 in
2 ft 1 in (25 in) 1 in
3 ft (1 yd) 1.44 in
6 ft 2.88 in
8 ft 3.84 in
10 ft 4.8 in
16 ft 7.68 in
25 ft 12 in (1 ft)
50 ft 24 in (2 ft)
100 ft 48 in (4 ft)

How big are things at 1:25?

Each bar shows how long an everyday object is once you shrink it 25 times. The bars share one ruler, so you can compare them directly.

  • Adult, standing 6 ft 2.9 in
  • Interior door 6 ft 8 in 3.2 in
  • Ceiling height 8 ft 3.8 in
  • Sedan 16 ft 7.7 in
  • Room length 20 ft 9.6 in
Lengths are rounded to the nearest tenth of an inch.

What does scale 1:25 mean?

In 1:25 the first number is the model and the second is the real object. One inch on the model equals 25 inches in real life, and one foot on the model equals 25 feet. You can also write it as 1/25, and model kit boxes usually do.

The scale factor is 0.04. To get a model length, multiply the real length by 0.04, or divide it by 25. A 10 ft wall is 120 in, and 120 × 0.04 gives 4.8 in. To go back, multiply the model length by 25: a 3 in part on the model stands for 75 in, which is 6 ft 3 in.

1:25 sits close to 1:24. A 1:24 model is about 4% larger than a 1:25 model of the same object. For a 16 ft car that is 8 in against 7.7 in. In US architecture the nearest standard scale is 1/2 in = 1 ft, which is exactly 1:24, so 1:25 shows up mostly on metric drawings.

Where is scale 1:25 used?

  • Plastic car and truck kits. AMT and MPC have sold American cars, pickups and semi trucks in 1/25 for decades, so most US-subject kits on the shelf use this scale. European and Japanese car kits, Tamiya for example, are mostly 1/24.
  • Metric architectural drawings. Designers in the UK, Europe and other metric countries draw bathrooms, kitchens, stairs and built-in furniture at 1:25. It shows more detail than 1:50 and fits a larger room on a sheet than 1:20.
  • Paper models. Card model publishers in Central Europe print armored vehicles and cars at 1:25.
  • Dioramas built around 1/25 vehicles. A 6 ft figure comes out just under 3 in tall, so it matches the kits next to it.

Scale 1:25 examples

  • A 16 ft sedan is 7.68 in long at 1:25, which is about the length of a 1/25 car kit.
  • A 19 ft full-size pickup comes out at 9.12 in.
  • An 8 ft ceiling is 3.84 in high on a room model.
  • A 12 by 15 ft bedroom fits in 5.76 by 7.2 in.
  • A 6 ft 8 in interior door is 3.2 in tall.
advertisement

Scale 1:25: frequently asked questions

Divide the real length by 25, or multiply it by 0.04. A 16 ft car is 192 in, and 192 ÷ 25 gives 7.68 in. To find the real size, multiply the model length by 25: 3 in on the model is 75 in, or 6 ft 3 in.

The scale factor is 1/25, or 0.04. Every model length is 4% of the real one. The factor is the same in inches, feet or centimeters.

No, 1/25 is slightly smaller. A 1/24 model is about 4% larger than a 1/25 model of the same subject. On a 16 ft car the gap is about a third of an inch (8 in against 7.68 in), so it shows up when you swap wheels or engines between kits.

A 6 ft person is 2.88 in tall at 1:25, a little under 3 in. A 5 ft 9 in person comes out at 2.76 in.

Yes. Both mean one unit on the model for 25 of the same units in reality. Kit boxes tend to print 1/25, and drawings tend to print 1:25.

Need a different scale?

Open the full calculator to use any ratio and unit, or make a printable scale bar in the scale bar generator.

Scale Bar Generator