What does scale 1:75 mean?
In 1:75 the first number is the drawing and the second is the real object. One inch on the drawing equals 75 inches in reality, which is 6 ft 3 in. The same ratio is sometimes written 1/75.
The scale factor is 1/75, about 0.0133. To get a drawing length, divide the real length by 75. A 30 ft wall is 360 in, and 360 ÷ 75 gives 4.8 in. To go back, multiply by 75: 2 in on the drawing stands for 150 in, or 12 ft 6 in.
1:75 is a metric scale. It sits between 1:50 and 1:100 and is common in Spain, Latin America, France, Italy and Thailand. Architects use it when a floor plan at 1:50 is too big for the sheet but 1:100 makes it too small to read. US drawings use inch-based scales instead, so you will mostly meet 1:75 on plans that come from metric countries.
Where is scale 1:75 used?
- Floor plans of apartments and houses that are a little too large for 1:50 on the chosen sheet size.
- Interior layouts that need to show a whole unit with its furniture on one board.
- Architecture school assignments. Metric triangular scale rulers usually carry 1:20, 1:25, 1:50, 1:75, 1:100 and 1:125, so students learn to read 1:75 directly from the ruler.
- Checking model sizes. 1:75 is rare in the model kit world, but it falls between 1:72 aircraft kits and 1:76 OO gauge railways, so it helps when you compare those two.
Scale 1:75 examples
- A 40 by 30 ft house plan fits in 6.4 by 4.8 in.
- A 12 by 15 ft bedroom comes out at 1.92 by 2.4 in.
- A 3 ft wide door opening is 0.48 in, just under half an inch.
- A 9 ft ceiling is 1.44 in high in a section drawing.
- A 75 ft deep lot measures exactly 1 ft on the drawing.